Figured Wood: Curly, Quilted, Birdseye, and Spalted

🛠️ Free Woodworking Plans: Build a Transformer Bench that converts from picnic table to bench — Get the free plans →
Estimated Reading Time: 13 minutes

You see a board labeled “curly maple” priced three times higher than regular maple. The grain has a shimmering, three-dimensional appearance that changes as you move. Another board is marked “quilted” and looks like fabric folded under the surface. You don’t understand what causes these patterns, why they’re expensive, or whether they’re actually better wood or just prettier. The terminology—curly, quilted, birdseye, spalted, flamed—sounds impressive but you’re not sure what distinguishes one from another.

Figured wood refers to wood with unusual grain patterns that create visual effects beyond ordinary straight grain. These patterns result from growth irregularities, stress, disease, or genetic anomalies. Understanding what creates different figure types, how to identify them, and how they behave differently than plain wood helps you choose appropriate material for projects and work with figured wood’s unique characteristics.

What “Figure” Means in Wood

Figure is any deviation from straight, even grain that creates visual interest. Most lumber has straight grain—growth rings parallel to the board face, fibers running the length of the board. Figured wood has irregularities: wavy grain, swirled patterns, or inclusions that create optical effects, three-dimensional appearance, or dramatic color variations.

Why Figure Commands Premium Prices

Figured wood is rare. Most trees grow straight-grained lumber. When a sawmill encounters figured wood, it might represent 1% or less of the logs they process. This scarcity drives premium pricing—curly or quilted wood can cost 3-10 times more than plain wood of the same species.

Figure also requires more careful processing. Irregular grain is harder to plane and sand without tearout. Sawmills process figured wood more slowly, with sharper blades, to avoid damage. This processing cost adds to the final price.

Figure vs. Grain Pattern

Don’t confuse figure with grain pattern. Grain pattern (flat-sawn vs. quarter-sawn vs. rift-sawn) refers to how the board is cut relative to growth rings. Figure refers to irregularities within the wood itself regardless of how it’s sawn. You can have curly figure in flat-sawn or quarter-sawn boards—the cutting method affects how dramatically the figure displays but doesn’t create the figure.

Curly (Tiger Stripe) Figure

Curly figure creates alternating light and dark bands perpendicular to the grain, producing a shimmering, three-dimensional effect. The bands seem to move as you change viewing angle—this optical illusion is called chatoyance.

What Causes Curly Figure

The wood fibers aren’t straight—they undulate in waves perpendicular to the tree’s growth direction. When light hits these wavy fibers, some surfaces reflect light while adjacent troughs absorb it, creating alternating light and dark bands. Change your viewing angle and different parts of the waves catch light, making the pattern seem to move.

Why some trees develop curly grain isn’t fully understood. Genetics plays a role (some maple trees produce curly wood consistently), but stress, disease, or growing conditions might also contribute. It appears randomly rather than predictably.

Degrees of Curl

Curly figure ranges from subtle to dramatic. “Light curl” has gentle waves visible mainly under finish. “Medium curl” shows obvious bands that move under changing light. “Heavy curl” or “deep curl” has pronounced three-dimensional appearance with dramatic chatoyance. Heavy curl is most expensive and most impressive but also hardest to work—deep figure means more grain direction changes that cause tearout.

Common Species with Curly Figure

Curly maple is most common and most prized. The light color of maple makes the curl particularly visible. Curly cherry, walnut, birch, and ash also occur but less frequently. Guitar makers value curly maple for instrument backs and sides where the figure is highly visible.

Working with Curly Wood

Expect tearout when planing or jointing. The grain direction reverses repeatedly across the board width. A planer cutting smoothly in one area tears out in adjacent areas where grain slopes the opposite direction. Use very sharp blades, shallow cuts (1/64 inch or less), and high cutting angles (more scraping than slicing). Hand planes with high angles (50+ degrees) work better than standard 45-degree bench planes.

Sanding is tedious. Start with coarser grits (120) and work progressively through finer grits (150, 180, 220, 320). Skipping grits leaves scratches visible in the figure. Expect to spend 2-3 times longer sanding curly wood compared to straight-grain wood.

đź’ˇ Tip: Figured wood shows best under clear finishes with some sheen. Matte finishes dull the chatoyance and hide the three-dimensional effect. Oil finishes or satin/semi-gloss polyurethane enhance figure dramatically.

Quilted Figure

Quilted figure looks like fabric with pillowy, three-dimensional “bubbles” or “blisters” across the wood surface. It resembles quilted cloth or rippled water frozen in wood.

What Causes Quilted Figure

The growth layers develop irregular, bumpy surfaces rather than smooth concentric rings. This creates localized areas of compression and tension in the wood fibers. When cut tangentially (flat-sawn), these irregularities appear as the quilted pattern. The exact cause is unclear—possibly genetic, possibly environmental stress, possibly a combination.

Quilted vs. Curly

Quilted figure has irregular, blob-like patterns. Curly figure has regular, parallel bands. Quilted looks organic and fluid; curly looks geometric and regular. Both create three-dimensional appearance but the visual effects are distinctly different. Some boards have both quilted and curly figure—premium wood but challenging to work with.

Species and Availability

Quilted maple (specifically bigleaf maple from the Pacific Northwest) is the classic example. It’s expensive—significantly more than curly maple because it’s rarer. Quilted mahogany, koa, and occasionally other species occur but are less common. Luthiers prize quilted maple for guitar tops where the figure creates stunning visual impact.

Working Challenges

Quilted wood is extremely difficult to surface without tearout. Grain direction changes constantly across small areas. No single cutting direction works for the entire board. Sharp blades, shallow cuts, and patience are essential. Many woodworkers use card scrapers for final surfacing rather than fighting planer tearout.

The figure only appears clearly after finishing. Raw quilted wood looks interesting but not spectacular. Under finish, especially oil or gloss finishes, the quilted pattern becomes dramatically three-dimensional. This delayed gratification makes working through the surfacing challenges worthwhile.

🔨 Figured Wood Working Tools

Tools that help work figured wood without excessive tearout:

Card Scrapers High-Angle Plane Carbide Planer Blades

Birdseye Figure

Birdseye figure consists of small, circular patterns scattered across the wood surface, resembling bird’s eyes looking out from the wood. The eyes have dark centers with lighter halos, creating a distinctive stippled appearance.

What Causes Birdseye Figure

The mechanism isn’t definitively known. One theory suggests localized stress causes the growth rings to compress into tight spirals, creating the eye pattern when the board is sawn. Another theory involves adventitious buds (potential branches that never developed) creating the distortion. Regardless of cause, birdseye is rare and unpredictable—you can’t tell from the outside of a log whether it contains birdseye.

Birdseye Maple Dominance

Birdseye figure occurs almost exclusively in sugar maple (hard maple). Other species occasionally show birdseye but it’s extremely rare. The Great Lakes region produces most commercial birdseye maple, though no one knows why some trees develop it while adjacent trees don’t.

The eyes vary in size and density. Dense birdseye with small, tightly packed eyes is most prized and expensive. Large, sparse eyes are less dramatic and less valuable. Premium birdseye maple costs more than curly maple—the rarity and demand from fine furniture makers and instrument builders drives high prices.

Working Considerations

Birdseye is less prone to tearout than curly or quilted wood because the disruptions are localized rather than continuous. The areas between eyes plane relatively smoothly. But the eyes themselves can tear out, leaving small divots that require careful sanding to remove.

The figure is visible in raw wood but becomes more dramatic under finish. Clear coatings enhance the contrast between the dark eye centers and lighter surrounding wood. The three-dimensional effect is less pronounced than curly or quilted figure—birdseye is more about texture and pattern than chatoyance.

Spalted Figure

Spalted wood contains dark lines or color variations created by fungal growth. Unlike other figures that result from grain irregularities, spalting is actual decay—controlled decay that adds visual interest without (yet) destroying the wood’s structure.

What Causes Spalting

Fungi colonize dead or dying wood. Different fungal species create different colors: black lines (zone lines where different fungi meet), gray or blue stains, pink or red blushes. The fungi are literally eating the wood, breaking down cellulose and lignin. If allowed to continue, the wood eventually becomes punky and worthless. Spalted wood is harvested at the point where fungal coloration is dramatic but structural degradation is still minimal.

Spalting vs. Figure

Spalting isn’t really figure in the same sense as curly or quilted—it’s decoration from decay rather than growth pattern. But it’s grouped with figured wood because it creates visual interest and commands premium prices. Spalted wood combines the structural characteristics of its base species with added color pattern from fungal growth.

Structural Concerns

Spalted wood is softer and weaker than clear wood of the same species. The fungus has begun breaking down the wood’s structure. For decorative items (boxes, bowls, picture frames) where strength isn’t critical, this softness is acceptable. For structural applications (chair legs, table legs, shelving), spalted wood is inappropriate—use it for areas without load-bearing requirements.

Heavily spalted wood is very soft, almost crumbly in extreme cases. Medium spalting offers a balance: enough color and line pattern to be interesting, enough structural integrity to be workable. Light spalting might not show dramatic patterns but behaves more like sound wood.

Working with Spalted Wood

The softness makes spalted wood easy to cut and shape but also easy to damage. Edges dent readily. Use sharp tools to avoid tearing the softened fibers. Sanding removes material faster than on sound wood—use lighter pressure and check progress frequently to avoid sanding through to uncolored wood below.

Stabilize spalted wood with thin CA glue or wood hardeners if it’s too soft to work reliably. This soaks into the wood and re-hardens it, making it easier to turn, carve, or sand without crumbling. The stabilizing agents also help preserve the wood and prevent continued fungal decay.

Spalted wood can cause respiratory irritation—the fungal spores and decomposition products are irritants. Always wear a good dust mask when working spalted wood, and use dust collection if possible. This is important for any wood dust exposure, but spalted wood is particularly problematic, similar to how working with spalted or figured wood requires adjusted technique compared to clear, straight-grain lumber.

⚠️ Health Warning: Spalted wood contains active or dormant fungal spores that can cause respiratory problems. Always wear at minimum an N95 mask when cutting, sanding, or turning spalted wood. Better yet, use a P100 respirator. This isn’t optional—fungal spores are legitimate health hazards.

Other Figure Types Worth Knowing

Beyond the major categories, several other figure types appear in lumber and specialty applications.

Flame Figure

Similar to curly figure but with the pattern oriented vertically rather than horizontally (assuming the board is oriented with grain running lengthwise). Flame figure appears in crotch wood—where the tree trunk divides into branches. The V-shaped growth patterns create flame-like figures. This is particularly dramatic in mahogany and walnut crotch veneer used in fine furniture.

Pommele Figure

Pommele (French for “dappled”) creates a rain-drop or blotchy pattern across the wood surface. It’s similar to quilted figure but with smaller, more irregular formations. African species (particularly sapele and bubinga) commonly show pommele figure. It’s prized for decorative veneer but less common in solid lumber.

Ribbon Figure

Ribbon figure shows alternating light and dark stripes running parallel to the grain (along the board length, not across it like curly figure). It appears in quarter-sawn wood where interlocked grain reflects light differently in adjacent growth layers. Sapele and mahogany commonly display ribbon figure. It’s attractive but less dramatic than curly or quilted patterns.

Burls

Burls are growths on trees containing wildly contorted grain that swirls in all directions. They create intricate, organic patterns impossible to predict. Burl wood is extremely expensive and difficult to work—grain runs in every direction simultaneously. It’s used primarily for veneer or small turned items (bowls, pens) where its dramatic figure can be displayed without trying to maintain structural integrity across large pieces.

Practical Advice for Working with Figured Wood

Figured wood requires adjusted techniques compared to straight-grain lumber. Following these practices minimizes frustration and tearout.

Blade and Cutter Selection

Sharp is essential. Dull tools tear figured wood rather than cutting cleanly. For hand planes, hone edges to mirror finish. For planers and jointers, use freshly sharpened or new blades. Carbide planer blades stay sharp longer than HSS (high-speed steel) and are worth the investment if you work figured wood regularly.

Higher cutting angles reduce tearout. Standard bench planes cut at 45 degrees. For figured wood, 50-60 degree angles work better—they scrape more than slice, reducing the tendency to lift grain. York pitch (50 degrees) or back-beveled blades achieve this.

Feed Direction and Cut Depth

With reversing grain in figured wood, there’s no single “correct” feed direction—you’re cutting against the grain somewhere regardless of orientation. Minimize tearout by taking very shallow cuts (1/64 inch or less per pass) and running material through slowly. Multiple shallow passes are safer than attempting to remove material quickly.

For router work, climb cutting (feeding against normal direction) sometimes produces cleaner results in figured wood. This is counterintuitive and potentially dangerous (increased kickback risk) but the cutting action can slice fibers cleanly rather than lifting them. Only attempt this if you’re experienced and can control the workpiece securely.

Sanding Strategy

Sand progressively through all grits. Don’t skip from 120 to 220—go 120, 150, 180, 220, and consider 320 for final smoothing under gloss finishes. Figured wood shows sanding scratches more obviously than plain wood because the grain changes create shadows that highlight imperfections.

Use random orbital sanders rather than belt sanders when possible. Belt sanders remove material aggressively and can create dips in soft areas (like between curly figure bands or in spalted wood). Random orbital sanders are slower but give more control.

Finishing to Enhance Figure

Oil finishes enhance figure dramatically. Tung oil, danish oil, or oil-based polyurethane make curly figure shimmer and quilted patterns pop three-dimensionally. Water-based finishes work but don’t enhance figure as dramatically—they’re clearer and don’t add the amber coloring that increases contrast.

Sheen level matters. Gloss finishes show the most dramatic chatoyance and three-dimensional effects. Satin finishes dull this somewhat. Matte finishes hide much of what makes figured wood special. For figured wood, aim for satin or semi-gloss at minimum unless you specifically want a subdued appearance.

Multiple thin coats work better than fewer thick coats. Figured wood grain creates shadows and reflections that can trap bubbles or create uneven coating thickness if finish is applied too heavily. Three to four thin coats level better and avoid these problems, comparable to how different wood species require different finishing approaches based on their characteristics.

✨ Finishing Supplies for Figured Wood

Finishes that enhance figure and bring out chatoyance:

Tung Oil Danish Oil Satin Polyurethane

Buying Figured Wood: What to Expect

Understanding pricing, grading, and availability helps set realistic expectations when shopping for figured wood.

Price Premiums

Figured wood costs significantly more than plain wood of the same species. Light curl might be 2-3 times more expensive. Heavy curl, quilted, or premium birdseye can be 5-10 times plain wood prices. Spalted wood falls in the middle—more expensive than plain wood but generally less than curly or quilted.

These aren’t arbitrary markups. The rarity, processing difficulty, and high demand from fine furniture makers and instrument builders drive real scarcity. If you find “cheap” figured wood, verify it’s actually figured—some sellers market mildly interesting grain as “figured” when it’s just decent grain pattern.

Buying Sight-Unseen Risks

Figure photographs poorly. What looks dramatic in photos might be subtle in person, and vice versa. Lighting in photos can exaggerate or hide figure. If possible, buy figured wood in person where you can see it under different lighting and angles. If buying online, understand the vendor’s grading system and return policy.

Project Quantity Considerations

Buy extra figured wood for your project. The irregular grain means more waste from tearout, breakage, or pieces that don’t display figure as well as expected. If you need 8 board feet for a project, buy 10-12 board feet of figured wood to ensure you have enough usable material after working through challenges.

🛠️ Free Woodworking Plans for Beginners

Download step-by-step plans for beginner-friendly builds, including our popular Transformer Bench that converts from a picnic table into a bench and back again. Start with straight-grain lumber to build fundamental skills, then incorporate figured wood for special projects once you’re comfortable with basic techniques.

Download Free Plans →
Affiliate Disclosure: This post may contain affiliate links. If you purchase through these links, we may earn a small commission at no additional cost to you.

FAQ

What’s the difference between curly and quilted figure?

Curly figure shows regular, parallel bands perpendicular to the grain direction, creating a striped appearance. Quilted figure shows irregular, blob-like patterns resembling quilted fabric or bubbles. Both create three-dimensional optical effects but the patterns are distinctly different. Curly is more common; quilted is rarer and more expensive.

Is figured wood stronger or weaker than plain wood?

Curly, quilted, and birdseye figured wood has approximately the same strength as plain wood of the same species—the figure doesn’t significantly weaken the wood. Spalted wood is weaker because fungal decay has begun breaking down the wood structure. Use spalted wood for decorative applications only, not structural components.

Why is figured wood so expensive?

Figured wood is rare—most trees produce straight-grain lumber. Curly or quilted wood might represent 1% or less of a sawmill’s production. This scarcity drives prices 3-10 times higher than plain wood. High demand from fine furniture makers and instrument builders for the limited supply keeps prices elevated. Processing difficulty also adds cost.

Can I plane figured wood without tearout?

Completely avoiding tearout in heavily figured wood is nearly impossible. Minimize it by using very sharp blades, taking shallow cuts (1/64 inch or less), and using high cutting angles (50-60 degrees). Hand scrapers often work better than planers for final surfacing of difficult figured wood. Expect to spend significant time sanding to remove tearout.

What finish brings out figure best?

Oil-based finishes (tung oil, danish oil, oil-based polyurethane) enhance figure most dramatically. They add amber coloring that increases contrast and makes chatoyance more visible. Use satin or semi-gloss sheen—gloss shows the most dramatic effects, matte hides figure. Water-based finishes work but don’t enhance figure as much because they’re clearer with less color.